MasterForce 241-0440 Manual do Operador descarregar pdf (Página 7)

Page 6

SAFETY INSTRUCTIONS

SERVICE

1. Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that

the safety of the power tool is maintained.

SPECIFIC SAFETY RULES FOR

RECIPROCATING SAW

1. Use battery only with charger listed.

Battery pack Charger

252-8024

252-8028

252-8029

252-8030

252-8031

252-8032

252-8033

252-8034

252-8036

252-8037

252-8044

DANGER:

Keep hands away

from cutting area and blade. Keep your

second hand on the auxiliary handle or

motor housing. If both hands are holding

the saw, the blade cannot cut them.

DANGER:

Blades coast after saw

is switched off.

1. Hold tool by insulated gripping surfaces

(handles) when performing an operation

where the cutting tool may contact hidden

wiring or its own cord. Contact with a “live”

wire will make the exposed metal parts of

the tool “live” and shock the operator.

2. Cutting workpieces covered with

oil can cause the blade to come off

unexpectedly. Wipe off all excess oil from

workpieces before cutting.

3. Keep your body positioned to either

side of the saw blade, but not in line with

the saw blade.

4. Do not touch the blade or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

5. Do not cut an oversized workpiece.

6. Check for the proper clearance under

the workpiece before cutting so that the

blade will not strike the workbench or

material under the workpiece.

7. Make sure the blade is not contacting

the workpiece before reaching full speed.

8. Secure material before cutting. Never

hold a workpiece in your hand or legs. Small

or thin material may flex or vibrate with the

blade, causing loss of control.

9. Never reach into the cutting path of the

blade.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentários a estes Manuais

Sem comentários