MasterForce 241-0440 Manual do Operador descarregar pdf (Página 15)

of the tool over time.

Use clean damp cloths to wipe the tool.

Check the state of all electrical cables.

Keep the motor air openings free from oil, grease and sawdust or woodchips,

and store tool in a dry place.

Be certain that all moving parts are well lubricated, particularly after lengthy

exposure to damp and/or dirty conditions.

LUBRICATION

All of the bearings in this tool are lubricated with a sufﬁcient amount of high-

grade lubricant for the life of the tool under normal operating conditions.

Therefore, no further lubrication is required.

WARNING!To ensure safety and reliability, all repairs should be performed

by a qualiﬁed service technician at an authorized Service Center.

WARNING! For your safety, always turn off the switch and remove the

battery from the band saw before performing any maintenance or cleaning.

GENERAL MAINTENANCE

The tool may be cleaned most effectively with compressed dry air. Always

wear safety goggles when cleaning tools with compressed air.

Avoid using solvents when cleaning plastic parts. Most plastics are

susceptible to damage from various types of commercial solvents and may

be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease,

etc.

WARNING! When servicing, use only identical MASTERFORCE replacement

parts. Use of any other parts may create a hazard or cause product damage.

To ensure safety and reliability, all repairs should be performed by a qualiﬁed

service technician at an authorized Service Center.

1 2 ... 10 11 12 13 14 15 16

Sem comentários

MasterForce 241-0440 Manual do Operador Página 15