MasterForce 267-3333 Manual do Operador descarregar pdf (Página 6)

Check Damaged Parts – Before further use of the appliance, a guard

or other part that is damaged should be carefully checked to determine

that it will operate properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may affect its operation. A guard or

other part that is damaged should be properly repaired or replaced by an

authorized service center unless indicated elsewhere in this manual.

Do not charge appliance in rain, or in wet locations.

Do not attempt to remove cut material nor hold material to be cut when

blades are moving. Make sure trimmer switch is off when clearing

jammed material from blades. Do not grasp the exposed cutting blades

or cutting edges when picking up or holding the hedge trimmer. “Caution–

blades coast after turn off.”

SPECIFIC SAFETY RULES FOR STRING TRIMMER

Use battery only with charger listed.

Battery pack Charger

252-8024

252-8036252-8028

252-8032

For best results, your battery tool should be charged in a location where

the temperature is above 41°F (5°C) but less that 122°F (50°C). Do not store

outside or in vehicles.

Nylon line – Keep face, hands and feet clear of rotating nylon line at all times.

The rotating line performs a cutting function – Use care when trimming

around screens and desirable plantings.

Keep children away – All visitors should be kept at safe distance from

work area.

KEEP GUARDS IN PLACE AND IN WORKING ORDER.

KEEP HANDS AND FEET AWAYFROM CUTTING AREA.

DO NOT CHARGE APPLIANCE IN RAIN OR IN WET LOCATIONS.

Avoid dangerous environments- Do not use or charge battery in damp or

wet locations.

Remove battery before servicing, cleaning or removing material from the

trimmer. Remove battery from your trimmer and carry by the front handle

when not in use.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sem comentários

MasterForce 267-3333 Manual do Operador Página 6