MasterForce 241-0423 Manual do Operador descarregar pdf (Página 12)

Page 11

BULB REPLACEMENT (FIG. 5)

1. Remove the battery pack from the

worklight.

2. Rotate the reector counterclockwise

to remove it.

3. Remove the old bulb by rotating it.

4. Insert new bulb by rotating bulb in place.

5. Align the reector and rotate it clockwise

to tighten into place.

WARNING:

ONLY use

recommended replacement bulbs; other

bulbs may cause personal injury.

NOTICE: Use 18V bulbs rated current

larger than 300mA.

MAINTENANCE

PUSH

FIG. 5

To tighten

To loosen

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The worklight does

not illuminate.

Battery is depleted. Charge the battery.

The bulb is broken. Replace the bulb.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sem comentários

MasterForce 241-0423 Manual do Operador Página 12